place8/21 Groves Ave, Mulgrave NSW 2756, Australia
scheduleMonday - Friday, 9:00am - 5:00pm
MAGNETIC PARTICLE, DYE PENETRANT & EQUIPMENT PRODUCTS
GET IN TOUCH ON (02) 4776 2320

BRANDSarrow_rightSMARTCHEM

fullscreen fullscreen_exit done_all launch
Handy Magna MP-A2L
zoom_in
Handy Magna MP-A2LSMARTCHEM
check_box_outline_blankShow Comparison
A light weight 240V AC magnetic yoke for Magnetic particle Inspection, using both wet and dry methods. It is used to detect surface defects and cracks in ferromagnetic components and structures with it's AC magnetic field. Simple to use it comes as standard with flexible legs and a mounted induction powered LED light useful for inspections in areas of low light.
IMS Permanent Magnet
zoom_in
IMS Permanent MagnetSMARTCHEM
check_box_outline_blankShow Comparison
A light weight permanent magnetic yoke for Magnetic particle Inspection. It is used to detect surface and subsurface defects and cracks in ferromagnetic components and structures with it's DC magnetic field. Simple to use it is particularly useful in hazardous areas where powered equipment is not allowed, or where mains power is not available. Magnet height 45mm and overall length is 310 mm. All Crack Detectors are numbered and certified. Permanent Magnet tested to Standard AS 1171, ASME V or BS6072.
SL3100 5W UV Head Light
zoom_in
SL3100 5W UV Head LightSMARTCHEM
check_box_outline_blankShow Comparison
SL3100 is a light weight adjustable UV headlamp featuring a 5W Nichia UV LED. Powered by a Lithium ion battery pack it offers 3.5 hours of continuous operation. The LED is not affected by magnetic fields, and there is no warm up time for maximum intensity. UV intensity and irradiated area can be focused between spot and flood by adjusting the lamp head. The lamp head can be tilted downwards, up to 90deg. The lamp is supplied with a 240V charger and comes in a carry case.
SL8904 Vulture LED UV/White Light Range
zoom_in
SL8904 Vulture LED UV/White Light RangeSMARTCHEM
check_box_outline_blankShow Comparison

A  light weight range of UV lights featuring 4 X 5W 365nm NICHIA UV LED's & 6 x White LED's.  Powered by a Lithium ion battery or 240V.  The LED's are not affected by magnetic fields, and there is no warm up time for maximum intensity.  Robust and light weight, the lamp is supplied in a carry case and comes in a range of UV outputs from the ASTME-3022 compliant 4,000 microwatts up to 15,000 microwatts. The Nichia LED's have a 30,000 hour life

Smartcheck Dye Pen Developer
zoom_inchevron_leftchevron_right
Smartcheck Dye Pen DeveloperSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK DYE PEN DEVELOPER is a Non-Aqueous Wet Developer used in the dye penetrant process to detect surface flaws such as cracks, laps and porosity in ferrous and non-ferrous materials. It consists of refined white particles in a rapid drying solvent system.

Conforms to ISO 3452-2, AMS 2644 form d & e, ASTM-E-1417, AS 2062 & ASME Section V
Smartcheck Dye Pen Red
zoom_inchevron_leftchevron_right
Smartcheck Dye Pen RedSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK DYE PEN RED is a water washable/solvent removable penetrant used in the visible dye penetrant process to detect surface flaws such as crack, laps and porosity in ferrous and non-ferrous materials including non-porous ceramics and some plastics.

Conforms to ISO 3452-2, AMS 2644 methods A & C, ASTM-E-1417, AS 2062 & ASME Section V
Smartcheck Dye Pen Remover
zoom_inchevron_leftchevron_right
Smartcheck Dye Pen RemoverSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK DYE PEN REMOVER is a non-chlorinated solvent remover/precleaner for the dye penetrant process used to detect surface flaws such as cracks, laps & porosity in ferrous and non-ferrous materials including non-porous ceramics and some plastics. It is rapid drying and leaves no residue. It is also an effective general purpose degreaser.

Conforms to ISO-3452-2, AMS 2644 Class 2, ASTM-E-1417, AS 2062 & ASME Section V
SmartCheck MPI Black
zoom_inchevron_leftchevron_right
SmartCheck MPI BlackSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK MPI BLACK is an oil based ready to use black magnetic ink for use in the Magnetic Particle Inspection process.

It consists of a dispersion of fine particles of black iron oxide in a highly refined non-volatile hydrocarbon. SMARTCHECK MPI BLACK uses high quality spherical particles of uniform size for improved mobility in response to magnetic fields. The carrier is virtually odourless and has a high flash point. SMARTCHECK MPI BLACK is used to detect fine surface and near surface discontinuities in ferrous materials such as low alloy steels. 

Also available in water-based concentrates & dry powder form.

Conforms to AMS 3043 (Aerosol), AMS 3041 (Bulk), ASTM E 3024, 
AS 1171 & ISO 9934-2


Smartcheck MPI Cleaner
zoom_inchevron_leftchevron_right
Smartcheck MPI CleanerSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK MPI CLEANER is a rapid drying solvent cleaner formulated specifically to remove white contrast paints used in visible magnetic particle inspections. SMARTCHECK MPI CLEANER is also effective at removing light oils such as  MPI carrier oils, and marker pen marks. SMARTCHECK MPI CLEANER does not contain chlorinated solvents nor aromatic hydrocarbons, to minimise toxicity. SMARTCHECK MPI CLEANER is low in sulphur and halogens.
Smartcheck MPI Fluoro
zoom_inchevron_leftchevron_right
Smartcheck MPI FluoroSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK MPI FLUORO is an oil based ready to use fluorescent magnetic ink for use in the Magnetic Particle Inspection process. It consists of a dispersion of fine particles of fluorescent iron oxide in a highly refined non-volatile hydrocarbon.SMARTCHECK MPI FLUORO uses high quality spherical particles of uniform size for improved mobility in response to magnetic fields. With its superior fluorescent coating, SMARTCHECK MPI FLUORO is designed to fluoresce bright green/yellow when exposed to UV light. The carrier is virtually odourless and has a high flash point. SMARTCHECK MPI FLUORO is used to detect fine surface and near surface discontinuities in ferrous materials such as low alloy steels. Also available in water-based concentrates & dry powder form.

Conforms to AMS 3046 (Aerosol), AMS 3045 (Bulk), ASTM E 1444, 
ASTM E 3024, AS 1171 & ISO 9934-2
Smartcheck MPI White
zoom_inchevron_leftchevron_right
Smartcheck MPI WhiteSMARTCHEM
check_box_outline_blankShow Comparison
SMARTCHECK MPI WHITE is a new generation, rapid drying white contrast paint formulated specifically to provide a white background to enhance indications in visible magnetic particle inspections.

SMARTCHECK MPI WHITE provides a high opacity matt white finish giving excellent colour contrast when darker steels are being inspected. SMARTCHECK MPI WHITE does not contain chlorinated solvents and is very low in aromatic hydrocarbons, to minimise toxicity. SMARTCHECK MPI WHITE is low in sulphur and halogens.

Conforms to BS 5044, AS 1171 & ISO 9934-2